Watch our Mounting Guide. First, figure out where on the windshield you would like to mount the device. We recommend it be centered on the windshield below the trim. Be sure to leave enough room to remove the trim in the future. Clean the windshield before mounting with the included alcohol wipe. Remove adhesive and hold mount in place with light pressure for 10 seconds. Remove the comma device and press firmly on the mount. Let the adhesive cure for 48 hours.
Before placing the device on your windshield, check the state and local laws and ordinances where you drive. Some state laws prohibit or restrict the placement of objects on the windshield of a motor vehicle. IT IS THE USER'S RESPONSIBILITY TO MOUNT THE DEVICE IN COMPLIANCE WITH ALL APPLICABLE LAWS AND ORDINANCES. Always mount your device in a location that does not obstruct the driver's view of the road. comma does not assume any responsibility for any fines, penalties, or damages that may be incurred as a result of any state or local law or ordinance relating to the use of your comma device.
Note: In California, a system with driver monitoring can be mounted on the top center of windshield.